Shimane · Municipality guide

Okuizumo — Where Hills Cut Away for Iron Became Rice Terraces

日本語 8 sources

Why visit

The rice terraces of Okuizumo, Shimane Prefecture, sit on land where hills were cut away to get iron.

According to the town tourism association, iron sand was mined by cutting away hillsides and washing the soil through channels so that the heavier sand settled out, a method called kanna-nagashi, mainly from the early modern period. The vast mined-out land was not abandoned but rebuilt as terraced rice fields, which now grow the local Nita rice.

According to the Agency for Cultural Affairs, this land was selected as an Important Cultural Landscape — "tatara iron-making and terraced rice fields of Okuizumo" — on 18 March 2014.

Who it is for

  • Anyone who wants to see the remains of one industry reused as the ground for another.
  • Anyone who chooses a craft by how it is made and how it sounds. This town makes abacuses.
  • Travellers with a car, or willing to use the local Kisuki Line. This guide cannot give journey times.

An iron town

According to the Agency for Cultural Affairs, the Okuizumo area, at the headwaters of the Hii River, is rich in high-quality magnetite known as masa iron sand, and in the early modern and modern periods it flourished as a centre of Japan's iron production, where tatara iron-making thrived.

According to the prefecture, the landscape covers parts of six districts of the town, about 1,563.3 hectares.

The tourism association notes that the Izumo Fudoki gazetteer, compiled in 733, records the iron of this district as hard and ideal for making tools.

Iron-making shaped the forests as well as the hills. The forests that supplied charcoal to the furnaces were cut in rotation on a cycle of about 30 years.

If you remember one thing, make it this: in Okuizumo, the hills dug for iron became rice fields, and the forests burned for charcoal were cut and regrown in turn.

The association says that Okuizumo is the only place in the world where a tatara furnace is still fired, to make the tamahagane steel used for Japanese swords.

The Okuizumo Tatara and Sword Museum is the guide centre for the Japan Heritage story of Izumo's tatara. It has a full-size cross-section of a tatara furnace and three bellows models you can work. On the second Sunday and fourth Saturday of each month a swordsmith demonstrates forging a Japanese sword (sometimes cancelled).

  • Address: 1380-1 Yokota, five minutes by car from JR Izumo-Yokota Station
  • Open 9:30–16:30; closed Tuesdays (the next day if a holiday) and 28 December–4 January
  • Admission: adults 530 yen, 1,270 yen on forging days

One of the landscape's viewpoints, the Hanouchidani kanna-nagashi site (1879-7 Takezaki), is reached by the Okuizumo Kotsu Torikami bus from JR Izumo-Yokota Station to Hinokamiso-iriguchi, then a 10-minute walk.

The sound of an abacus

According to the prefecture, the Unshu soroban began around 1830 with Murakami Kichigoro, a carpenter of Kamedake, who used plum-wood beads, soot-darkened bamboo rods and an oak frame. Ebony, boxwood and birch are used today.

A good abacus is one whose beads run smoothly and give a clear, high sound, so the beads and rods are finished with great care. It was designated a national Traditional Craft in 1985.

Teachers sent from Yokota (now part of Okuizumo) to Thailand helped make abacus arithmetic popular there.

The Unshu Soroban Traditional Industry Hall, founded in 1990, displays the history, techniques, materials, tools, making process and the work of master craftsmen.

  • Address: 992-2 Yokota, next to JR Izumo-Yokota Station
  • Open 9:00–16:30; closed Tuesdays (the next day if a holiday) and 28 December–4 January
  • Admission: adults 310 yen

How to get there

  • Rail: the JR Kisuki Line starts at Shinji Station on the San'in Main Line in Matsue. Its stations in Okuizumo include Izumo-Yashiro, Izumo-Minari, Kamedake and Izumo-Yokota
  • The town tourism association is inside Izumo-Minari Station, and its directions start from that station
  • By air: the association lists Izumo Enmusubi (Izumo) Airport and Yonago Kitaro (Yonago) Airport

Limitations and cautions

  • Journey times from Matsue, Izumo, Hiroshima or the airports, and the frequency of Kisuki Line trains, were not obtained. The tourism association's route map is an image whose details could not be read as text. This guide gives routes only.
  • The sword museum is five minutes by car from Izumo-Yokota Station; walking times were not obtained. Bus frequency to the kanna-nagashi site was not obtained.
  • "The only place in the world where a tatara furnace is still fired" is the town tourism association's wording. It was not confirmed by a public-body source in this database, nor were the current operating season or whether it can be visited.
  • The abacus designation year follows the prefecture (1985); the hall's own page gives a different year.
  • Sword-forging demonstrations are sometimes cancelled. Prices and hours may change.
  • The Japan Heritage certification year and its member municipalities were not confirmed from a public-body source.
  • Hot springs, places to eat Nita rice or Izumo soba, and lodging are all unresearched and are not covered here.
  • Population and area were not obtained.

Sources

Every fact in this guide is drawn from the sources below.